Reinforced concrete section
checks and design

Biaxial bending, interaction surfaces and diagrams, reinforcement design. ACI 318, AASHTO LRFD, CSA A23.3, CSA S6, AS 3600, NZS 3101.

Geometry, materials, loads, analyses, PDF report.

Explore the analyses

On-device computation · No account · 7-day trial

Supported codes

ACI 318

AASHTO LRFD

CSA A23.3

CSA S6

AS 3600

NZS 3101

Advanced parameters for each code profile.

01 / SETUP

Parametric, hollow or custom sections.

Solid or hollow sections, beams, walls or a custom outline. Define the concrete geometry, reinforcement layout, materials and load cases.

01Geometry and reinforcement

Choose a standard section or define a custom outline, then set the reinforcement layout.

02Materials

Select a design code, concrete and steel strengths, and adjust the advanced parameters.

03Load cases

Enter axial forces and bending moments, or import several load cases at once.

02 / ANALYSE

Section analysis.

Section and load cases are entered once and shared by every analysis.

BIAXIAL BENDING

3D resistance check.

Rotate the interaction surface, select a load case and inspect its check. Colours distinguish loads within the resistance domain, on its boundary and outside it.

N–Mx–My interaction surface
Checks for each load case
Resisting moments

RCS / 01

3D resistance check. — Results calculated in RCS

03 / DOCUMENT

PDF report: assumptions, inputs and results.

Bring project inputs, figures and results together in a PDF report. Choose a concise or detailed presentation, then select the tables and plots to include.